034 Motorsport - Dual Pulley Upgrade Package, 190mm - Audi B8 S4/S5/Q5 & C7 A6/A7 (3.0 TFSI)

034 Motorsport UK - Dual Pulley Upgrade Package, 190mm - Audi B8 S4/S5/Q5 & C7 A6/A7 (3.0 TFSI)

* purchase this kit as a no fuss all included package to uprgade to stage 2.5 software on the 3.0 TFSI supercharged engine

Assembled in this kit is every piece of hardware needed to upgrade any Audi B8 S4/S5/SQ5, C7 A6/A7, and D4 A8 equipped with the 3.0 TFSI Supercharged V6 to 034Motorsport Stage 2+ tuning! The hardware in this kit will completely transform your 3.0T Supercharged Audi into a high-performance powerhouse, capable of thrashing any road course, drag strip, or commute

034Motorsport Dynamic+ 3.0 TFSI Performance Software is flashed via the factory OBD-II port, and does not require any physical modification of the factory ECU. Stage 2+ is available in 95 Octane, 99 Octane, 104 Octane, and E40 Octane files.

NOTE: Software sold separately.

WHAT'S INCLUDED:

* 034Motorsport Supercharger Pulley Upgrade
* 034Motorsport 190mm Billet Crank Pulley Upgrade
* Bando Rib-Ace PK1320 Pulley Belt
* Installation Hardware

SUPERCHARGER PULLEY UPGRADE:

At 57.70mm in diameter, the 034Motorsport 3.0 TFSI Supercharger Pulley is significantly smaller than the factory unit in order to increase the drive ratio of the supercharger. Spinning the supercharger faster yields increased boost pressure throughout the RPM range, resulting in increased horsepower and torque throughout the powerband when paired with 034Motorsport Stage 2+ Performance Software.

190MM CRANK PULLEY UPGRADE:

The 034Motorsport 3.0 TFSI Supercharger 190mm Crank Pulley Upgrade for the Audi B8/B8.5 S4/S5/Q5/SQ5, C7 A6/A7, and D4 A8 is an easy way to increase supercharger rotational speed to provide more boost to your engine. This kit works with both the OEM supercharger pulley and the 034Motorsport 3.0 TFSI Supercharger Pulley Upgrade.

The 034Motorsport 3.0 TFSI Supercharger 190mm Crank Pulley Upgrade is machined from a single piece of 6061-T6 billet aluminum, and black anodized for an attractive finish resistant to corrosion. This design is 62% lighter than the OE pulley, significantly reducing rotational weight and parasitic loss. This is a single piece inner and outer pulley, not a pulley "overlay", which adds rotational weight.

Features:

Machined from a Single Piece of 6061-T6 Billet Aluminum
Black Anodized with Laser Engraving for a Durable Finish
Reduced Parasitic Loss - 62% Lighter than Stock
Complete Inner and Outer Pulley, Not Just a Pulley "Overlay", Which Adds Weight

STAGE 2+ ECU TUNING: (NOT INCLUDED)

034Motorsport Dynamic+ Stage 2+ Performance Software for the Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, and D4 A8 3.0 TFSI is engineered to further increase horsepower and torque output over Stage 2 levels with the addition of 034Motorsport's 190mm Lower Pulley in addition to our upper pulley. The Supercharger Pulley Upgrade allows for increased boost pressure from the factory Eaton TVS1320 Supercharger throughout the powerband, while 034Motorsport's proprietary calibrations safely yield additional power from the 3.0 TFSI engine

Stage 2+ Performance Software features a higher redline of 7,400 RPM, resulting in a broader powerband and greater peak horsepower figures than available with the factory 6,400-7,000 RPM maximum engine speed (Stock RPM limit is dependent on B8 or B8.5 generation). In addition to power improvements, 034Motorsport's engineers spent a significant amount of time refining the throttle mapping in both Dynamic and Comfort modes to provide improved throttle response and allow for more precise throttle modulation. Stage 2+ Performance Software also enables left-foot braking, which allows for further control of the vehicle when driving on track.

Fitment: