034 Motorsport UK - Dynamic+ RCO - Camber & Roll Centre Adjusting Ball Joints - Audi 8V/8Y S3/RS3 & Volkswagen MK7/MK8
* fits MQB & MQB EVO lowered vehicles
034 Motorsport Dynamic+ RCO - Camber & Roll Center Adjusting Ball Joints fit Audi 8V/8Y and Volkswagen MK7/MK8 vehicles. These are engineered to significantly improve the handling performance for lowered vehicles. Designed as a true drop-in upgrade, the Dynamic+ RCO Ball Joints provide an additional negative 1.2° of camber at each of the front wheels and raise and optimize the roll center by 10mm.
- 1.2° of negative camber
- Roll centre corrected 10mm
Dynamic+ RCO Ball Joints are the ideal solution for enthusiasts in search of enhanced handling performance, confidence-inspiring grip, precise steering response, and maximum stability throughout turns. Equally well-suited for the street and track, Dynamic+ RCO Ball Joints deliver a perfect balance of performance, durability, and comfort.
Dynamic+ RCO Ball Joints were tested extensively on the street and at the track with multiple 034Motorsport MQB & MQB-Evo Development Vehicles before release to ensure that they deliver excellent performance and durability. Dynamic+ RCO Ball Joints are coated in a corrosion resistant nickel-zinc coating to ensure long life and durability for years to come.
The concept of roll center is the point at which cornering forces in the suspension are transferred to the vehicle body in relation to the vehicle’s center of gravity. The roll center is negatively impacted when lowering McPherson Strut vehicles as the point at which the suspension pivot in the lower ball joint changes, allowing for the center of gravity to have an increased effect, or leverage, on a vehicle's roll control. By installing the Dynamic+ RCO Ball Joints, the point of roll center is moved closer to the center of gravity, providing maximum stability, less roll force transferred with less body roll, and increased traction throughout turns.
The Dynamic+ RCO Ball Joints also increase negative camber at each wheel by approximately 1.2°. This gain in negative camber will increase grip when cornering, improve steering feel & handling response, and improve turn-in, facilitating quicker, more consistent lap times. When paired with the 034Motorsport Dynamic+ Camber Mounts, the front camber is dramatically increased. This combination is ideal for enthusiasts looking to maximize front-end grip at the slight sacrifice of tire longevity.
DYNAMIC+ RCO BALL JOINTS BENEFITS:
- Revamped Suspension Geometry for Performance Driving
- Adjusts and Optimizes Roll Center by 10mm
- Adds Approximately 1.2° of Negative Camber at Each Wheel (Compared to Factory Ball Joints)
- Significantly Enhanced Grip When Cornering
- Improved Steering Feel & Handling Response
FEATURES:
- Corrosion Resistant Nickel-Zinc Coating
- Direct Bolt-In Fitment
- Requires Alignment After Installation
- NOTE: If You Have a Big Brake Kit, Please Double Check Ball Joint Clearance to Rotor Before Finalizing Installation.
- Compatible with Racingline Stage 3 Big Brake Kit
OE PART INTERCHANGE:
- 3C0 407 365 B
- 3C0 407 366 B
WHAT’S INCLUDED:
- Left Ball Joint
- Right Ball Joint
- (QTY.6) M10 Flanged Nuts
- (QTY.2) M12 Flanged Nuts
VEHICLE FITMENT V1:
- Audi A3 8V
- Audi S3 8V
- Audi RS3 8V
- VW Golf Mk7
- VW Golf Mk8
- SEAT Leon Mk3
- SEAT Leon Mk4
- Skoda Octavia Mk3
- Skoda Octavia Mk4
VEHICLE FITMENT V2:
Make | Model | Years | Chassis | Engine |
---|---|---|---|---|
Audi | A3 | 2013-2016 | 8V | 1.8 TFSI |
Audi | A3 | 2013-2016 | 8V | 2.0 TDI |
Audi | A3 | 2013-2020 | 8V/8V.5 | 2.0 TFSI |
Audi | RS3 | 2015-2017 | 8V | 2.5 TFSI |
Audi | RS3 | 2017+ | 8V.5 | 2.5 TFSI EVO |
Audi | S3 | 2013-2020 | 8V/8V.5 | 2.0 TFSI |
VW | GLI | 2018+ | MkVII | 2.0 TSI Gen3 |
VW | Golf | 2013-2020 | MkVII/MkVII.5 | 1.8T Gen3 |
VW | Golf | 2013-2016 | MkVII | 2.0 TDI |
VW | Golf SportWagen | 2013-2020 | MkVII/MkVII.5 | 1.8T Gen3 |
VW | Golf Alltrack | 2013-2020 | MkVII/MkVII.5 | 1.8T Gen3 |
VW | Golf R | 2013-2019 | MkVII/MkVII.5 | 2.0 TSI Gen 3 |
VW | GTI | 2013-2020 | MkVII/MkVII.5 | 2.0T Gen3 |
VW | GTI | 2021-Present | MK8 | 2.0T Gen4 |
IMPORTANT NOTES:
- These ball joints are not compatible with the majority of big brake kits, as they often catch on the back of the discs.
- this kit does not fit the 8S TT, TTS or TTRS