034 Motorsport UK - Dynamic+ AL551 ZF8 TCU Software - Audi Q5 3.0 TFSI ZF8 Tuning
* Fits Audi Q5 8R 3.0 TFSI supercharged
034 Motorsport releases Dynamic+ Performance TCU Software for Audi B8/B8.5 Q5 models equipped with the AL551 8-Speed ZF8 transmission and 3.0TFSI Supercharged Engine! Flashed directly through your vehicle’s OBD2 port 034Motorsport’s proprietary calibrations for the AL551 ZF8 TCU safely and effectively optimize its operation for Stage 1, Stage 2, or Stage 2+ Dynamic+ Performance ECU Software. The result is a noticeable improvement in acceleration without sacrificing comfort or reliability.
Related product: Audi Q5 8R 3.0 TFSI
In addition, End User Flashing allows Dynamic+ Performance Software customers to receive and install software updates and revisions, flash back to stock, or upgrade to the next stage of performance software for their vehicle.
DYNAMIC+ TCU TUNING FEATURES:
Increased Maximum Shift Point
- With accompanying 034Motorsport ECU tuning, the maximum RPM before shifting is raised from the factory 6,300RPM to 7,200RPM, significantly increasing the ability to maximize the performance of your supercharged V6!
Improved Shift Speeds
- To further enhance the drivability of your Audi, the shift times are dramatically decreased in all driving modes, which ultimately results in quicker acceleration.
Optimized Launch Control
- Torque converter stall during launch control has been raised to allow for a higher launch RPM, maximizing the performance of your supercharged V6 at the drag strip!
Advanced Launch Control Compatibility
- Alongside the standard launch control, the Dynamic+ AL551 TCU Tune is compatible with Advanced Launch Control, found on all 034Motorsport Supercharged 3.0T ECU Tunes (Non-CREC).
Advanced Launch Control on AL551 Equipped vehicles adds:
Adjustable Launch RPM via Cruise Control Stalk
- Limited to Maximum Torque Converter Stall RPM
Adjustable Launch Load via Throttle Pedal
- Maximize available traction by launching by changing the pedal angle while staging! For maximum load, floor it!
Cooling Fans & Auxiliary Supercharger Coolant Pump at 100% below 10kph
- With the cruise control stalk in the ON position, the cooling fans and auxiliary supercharger coolant pump will run at 100% duty cycle to minimize heat soak and reduce charge air temps in preparation for your next run down the strip! Once beyond 10kph, the cooling fans and auxiliary pump resume regular operation.
Soft Cut and Ignition Cut Style Launch Control
- Depending on the ECU file you are running, launch control RPMs will be limited by our Fuel Cut Launch Strategy or our Ignition Cut Strategy. Ignition Cut Launch Control is only available on Test-Pipe files for Sanctioned Racing Use Only.
IMPROVED TORQUE MANAGEMENT:
As with any automatic transmission vehicle, the ECU and TCU computers work synchronously to properly apply torque to the vehicle's drivetrain in a safe and reliable manner. Within both the ECU and TCU, there are factory safety tables that limit overall torque output based upon what the factory first tuned the car for. The ECU reports the output of torque from the engine to the TCU, and the TCU decides if this is suitable, or too much. If it is too much, the TCU will command the ECU to reduce torque output based upon its safety tables.
034Motorsport takes a holistic approach with its Dynamic+ Tuning, and aims to retain as many OEM safety protocols as possible. While it is possible to tune around the factory TCU torque limiters from the ECU side, this is done at the expense of torque safety features that are integral in keeping your transmission running safely. 034Motorsport’s calibrators tune the ECU to work with the TCU to provide accurate torque values, and recalibrate the appropriate safety ranges for the TCU. Taking these extra steps to retain OEM safety systems on the ECU and TCU side is just one of the many reasons that Dynamic+ software provides substantial yet reliable performance increases.
| STOCK | 034 MOTORSPORT | |
|---|---|---|
| Maximum Shift RPM | 6,300 RPM | 7,200 RPM |
| Launch Control RPM** | Single Point - ~2,100 RPM | Maximum Converter Stall RPM - Varies based on TQ Output (2,900-3,400 RPM) |
| Advanced Launch Control Compatibility | No | Yes |
| Torque Limit | Stock | Increased to Match ECU Tune |
| Shift Speed | Slow | Fast |
DYNAMIC+ FLASH KIT
The Dynamic+ end user flash kit allows customers to install ECU & DSG software upgrades themselves, from the comfort of their own driveway. Receive and install software updates and revisions, flash back to stock, or upgrade to the next stage of performance software from your vehicle's OBD2 port. This ECU flashing process is quick and easy, no technical skills are required.
Typical times to flash your ECU and TCU is 30 to 40 minutes.
FLASHING DIRECTIONS
- Receive welcome email (after purchase) with 034 software account and user guide
- Plug into OBD2 port and USB port on laptop & take read of stock ECU / TCU
- Send 034 stock file details from software (very easy)
- Plug back into OB2 port & USB and flash tune your ECU / TCU
Once you have taken the stock read of the ECU you can always flash your car back to stock at any time. You can also flash between stages.
The reading / flashing and software process is not complicated. Everything is straight forward and anyone who has the computer skills to send an email can do this process.
HOW TO ORDER
You can choose to have your vehicle remapped at Awesome GTI in Manchester UK. This includes free power runs. If you select this option you do not need to purchase the 034 end user flash kit. If you wish to remap your vehicle at home you need to select an option "with end user flash kit". If you already own a flash kit you can select "no flash kit required".
SUMMARY
All software is covered under a 30 day money back satisfaction guarantee. To compliment software 034 Motorsport have the largest range of aftermarket performance products for the B8 and C7 chassis. There is simply no other brand with a more comprehensive product range.
For any questions and help with tuning please email info@034motorsport.co.uk
