034 Motorsport - Audi B8/8.5 S5 Tuning - Stage 1 & 2 ECU tunes

034 Motorsport UK - Audi B8/8.5 S5 Tuning - Stage 1 & 2 ECU tunes

034 Motorsport are a market leader and pioneer for tuning Audi B8 S5 3.0 TFSI supercharged engines. A full suite of meticulously calibrated ECU and TCU files are ready for you flash at home with your Dynamic+ flash cable. Stage 1, stage 2, stage 2.5, 95 RON, 98 RON, E85 blends and DL501 DSG tuning files are available. As a company favourite vehicle 034 continues to race, test, daily drive and develop files for the B8 supercharged platform. If you are looking for the most up to date, powerful, reliable and tested files 034 Motorsport should be your only choice!

In addition to huge power gains 034 Motorsport has added a range of additional features and benefits to the ECU and TCU files available. Some examples include advanced launch control, multiple fuel maps including Ethanol blends, increased rev limiter, throttle mapping, left foot braking, speed limiter removal, OBD2 flashing and highly developed DL501 TCU tune.

Due to the substantial increase in torque we recommend your pair all ECU tunes with 034 Motorsport DL501 DSG tune for an optimal driving experience.

034 Motorsport Audi B8 S5 power figures

Stock: 332 HP / 318 lb/ft
Stage 1 95 RON: 430 HP / 374 lb/ft 
Stage 1 98 RON: 438 / 374 lb/ft
Stage 2 95 RON: 450 HP / 387 lb/ft
Stage 2 98 RON: 455 HP / 389 lb/ft 

Please note crackle map / overrun is provided free of charge with all stage 2 and 2.5 files.

Through extensive testing and development 034 Motorsport holds numerous world records for B8 S5 quarter mile times. 

STAGE 1 AUDI B8 S5

034 Motorsport Stage 1 Performance Software for the B8/B8.5 Audi S5 3.0 TFSI is engineered to safely increase horsepower and torque with no hardware modifications required. 034Motorsport's proprietary calibrations increase boost by controlling the supercharger bypass, while optimizing timing and fueling maps to extract additional power from the 3.0 TFSI engine.

Stage 1 Performance Software features a higher redline of 7,200 RPM resulting in a broader powerband and greater peak horsepower figures. In addition to power improvements, 034Motorsport's engineers spent a significant amount of time refining the throttle mapping in both Dynamic and Comfort modes to provide improved throttle response and allow for more precise throttle modulation. Stage 1 Performance Software also enables left foot braking, which allows for further control of the vehicle when driving on track.

Stage 1 is available in 95 RON and 98 RON octane.

STAGE 2 AUDI B8 S5

034 Motorsport Stage 2 Performance Software for the B8/B8.5 Audi S5 3.0 TFSI requires a supercharger pulley upgrade and further increase horsepower and torque. The Supercharger Pulley Upgrade allows for increased boost pressure from the factory Eaton TVS1320 Supercharger throughout the powerband, while 034Motorsport's proprietary calibrations safely yield additional power from the 3.0 TFSI engine. 

Required product: 034 Motorsport 3.0 TFSI supercharger pulley upgrade

OR you can leave the supercharger pulley stock and install a crank pulley.

Required product: 179 mm crank pulley

Required product: 190 mm crank pulley

Please note if you wish to tune to stage 2.5 you can skip this pulley upgrade with a single 207mm crank pulley upgrade

Stage 2 is available in 95 RON and 98 RON octane.

Please note crackle map / overrun is provided free of charge with all stage 2 and 2.5 files.

STAGE 2.5 AUDI B8 S5

034 Motorsport Stage 2.5 Performance Software for the B8/B8.5 Audi S5 3.0 TFSI is engineered to further increase horsepower and torque output over Stage 2 levels with the addition of 034 Motorsport's 179 or 190 mm Lower Pulley in addition to our upper pulley. The Supercharger Pulley Upgrade allows for increased boost pressure from the factory Eaton TVS1320 Supercharger throughout the powerband, while 034Motorsport's proprietary calibrations safely yield additional power from the 3.0 TFSI engine.

Related product: 179 mm crank pulley
Related product: 190 mm crank pulley
Related product: 207 mm crank pulley

Please note if you install the 207 mm crank pulley you do not need to install the supercharger pulley

Stage 2.5 Performance Software features a higher redline of 7,400 RPM, resulting in a broader powerband and greater peak horsepower figures than available with the factory 7,000 RPM maximum engine speed.

Stage 2.5 is available in 95 RON and 98 RON octane.

Stage 2.5 is the most aggressive file requiring mandatory exhaust and cooling upgrades.

Please note crackle map / overrun is provided free of charge with all stage 2 and 2.5 files.

DL501 7-SPEED DSG TCU TUNE

034 Motorsport’s proprietary calibrations for the DL501 TCU safely and effectively raise the factory transmission's RPM limiter, increasing the available powerband and allowing your car to make use of Stage 1, Stage 2, or Stage 2+ ECU Performance Software.

034 Motorsport Performance DSG Software also increases the shift speed and optimizes the shift points in Drive and Sport modes for better performance and driveability. The result is a noticeable improvement in acceleration, without any sacrifice in comfort or reliability.

Features:

• Raised RPM Limit for Use with Stage 1/2/2+ Performance Software
• Compatible with Advanced Launch Control
• Optimized Shift Points in Drive & Sport Mode
• Increased DSG Clutch Clamping Force
• Improved Shift Speed
• Manual Mode Auto Downshift Disabled
• Raised Launch Control Counter Limit
• Flashed Directly Via the Factory OBD-II Port

Related product: DL501 DSG Tune

ADVANCED LAUNCH CONTROL

034 Motorsport has pushed the boundaries of what is possible for the 3.0T Supercharged engines found in many Audi’s through our Dynamic+ tuning!

These features allow you to customize your desired launch RPM on the fly via your cruise control stalk, and run the intercooler pumps and engine fans at full speed below 10kph to allow for full cooling during staging prior to drag racing. This provides a large advantage over factory launching protocols as it results in the coolest possible IATs, and allows the driver to adjust their launch settings to be the most optimal for their conditions.

DYNAMIC+ FLASH KIT

The Dynamic+ end user flash kit allows customers to install ECU & DSG software upgrades themselves, from the comfort of their own driveway. Receive and install software updates and revisions, flash back to stock, or upgrade to the next stage of performance software from your vehicle's OBD2 port. This ECU flashing process is quick and easy, no technical skills are required.

Typical times to flash your ECU and TCU is 30 to 40 minutes.

FLASHING DIRECTIONS

• Receive welcome email (after purchase) with 034 software account and user guide
• Plug into OBD2 port and USB port on laptop & take read of stock ECU / TCU
• Send 034 stock file details from software (very easy)
• Plug back into OB2 port & USB and flash tune your ECU / TCU

Once you have taken the stock read of the ECU you can always flash your car back to stock at any time. You can also flash between stages.

The reading / flashing and software process is not complicated. Everything is straight forward and anyone who has the computer skills to send an email can do this process.

034 MOTORSPORT FLASH PORTAL

For more information visit the 034 Motorsport flash portal

FITMENT

RECOMMENDED PRODUCTS

PULLEY HELP

There are a number of different supercharger and crank pulley modifications you can install to achieve stage 2 and 2.5 power. We recommend for simplicity and cost if you are only interested in stage 2 to install the supercharger pulley.

You can also install a 179 or 190 mm crank pulley for stage 2 power. We recommend the 179 mm pulley as a safe medium, 190 mm will require aftermarket catalytic converters and upgraded supercharger heat exchanger.

For stage 2.5 you need a supercharger pulley, 179 or 1900 mm crank pulley OR the single 207 mm crank pulley.

HOW TO ORDER

You can choose to have your vehicle remapped at Awesome GTI in Manchester UK. This includes free power runs. If you select this option you do not need to purchase the 034 end user flash kit. If you wish to remap your vehicle at home you need to select an option "with end user flash kit". If you already own a flash kit you can select "no flash kit required".

SUMMARY

We believe 034 Motorsport software for the B8 and C7 3.0 TFSI to lead the market for price, performance and reliability. All software is covered under a 30 day money back satisfaction guarantee. To compliment software 034 Motorsport have the largest range of aftermarket performance products for the B8 chassis. There is simply no other brand with a more comprehensive product range.

For any questions and help with tuning please email info@034motorsport.co.uk